Furuno MU-150HD - Manual (Page 7)

vi
SYSTEM CONFIGURATION
Connectable equipment
Note 1: This equipment is used as a display for a Non-SOLAS radar or ECDIS.
Note 2: Landscape orientation only.
Note 3: When inputting SXGA, a circle may be displayed as an ellipse because the aspect ratio
differs. See "DISP MODE*" on page 17. Also, it may be difficult to read small characters.
Equipment Resolution Signal
FCV-1200L/M VGA Analog RGB, via IF-8000
CH-250/S VGA Analog RGB, via IF-8000
CH-270 VGA Analog RGB, via IF-8000
CH-300 VGA Analog RGB, via IF-8000
CSH-5L/8L XGA Analog RGB
FSV-24/S-BB SXGA Analog RGB
FSV-30/S-BB SXGA Analog RGB
FSV-84/L SXGA Analog RGB
FCV-30 SXGA Analog RGB
CI-68/88 VGA Analog RGB
FR-1510MK-3 XGA Analog RGB, OP03-153 required
FR-21x5 series SXGA Analog RGB, OP03-162 required
FAR-21x7 series SXGA DVI
FEA-2107 SXGA DVI
FEA-2807 SXGA DVI
FCR-21x7 series SXGA DVI
FCR-28x7 series SXGA DVI
MODEL1833C series (NAVnet) VGA Analog RGB, OP03-176 required
MODEL1833C-BB series (NAVnet) VGA Analog RGB
MODEL1824C series (NAVnet vx2) VGA Analog RGB, OP03-176 required
MODEL1824C-BB series (NAVnet vx2) VGA Analog RGB
MFD8 (NAVnet 3D) VGA DVI
MFD12 (NAVnet 3D) SVGA DVI
MFDBB (NAVnet 3D)
SVGA
DVI XGA
SXGA
MODEL1824C/1833C/1943C,
FSV-30, FCV-30, FCV-1200L etc.
MFD8/MFD12/MFDBB,
FAR-21X7 series etc.
CCD camera,
DVD recorder, etc.
RGB
DVI
2 ports
VIDEO (NTSC/PAL)
3 ports
12-24 VDC
MARINE DISPLAY
MU-150HD
Environmental category
MU-150HD: Protected from the weather