Furuno MU-150HD - Manual (Page 25)

2. ADJUSTMENTS
17
5. Press the W or X key to adjust the setting.
6. Press the MENU key to close the menu.
RGB/DVI menu descriptions
*: When inputting SXGA, a circle may be displayed as an ellipse because the aspect ratio differs.
In this case, select [NORMAL] from the [DISP MODE] menu item on the [RGB], [DVI1], or [DVI2]
menus. The right and left on the screen are left blank, but this is normal.
**: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
Menu item Function Setting
H_SIZE Adjusts the image size horizontally.
Horizontal size: W (narrow), X (wide)
Depending on in-
put signal
V_SIZE Adjusts the image size vertically.
Vertical size: W (narrow), X (wide)
PHASE** Adjusts the sample timing so that the flicker disappears and
the text is clear. 1 to 32
CONTRAST Increases or decreases the contrast level.
W (darken), X (brighten) 1 to 64
H_POSITION Moves the image position horizontally.
W (leftward), X (rightward) 1 to 99 (RGB),
1 to 50 (DVI1,
DVI2)
V_POSITION Moves the image position vertically.
W (upward), X (downward) 1 to 40
R_LEVEL Adjusts the red color level.
W (weaken), X (strengthen) 1 to 64
G_LEVEL Adjusts the green color level.
W (weaken), X (strengthen) 1 to 64
B_LEVEL Adjusts the blue color level.
W (weaken), X (strengthen) 1 to 64
TEMPERATURE Adjusts the color temperature.
5500K (the most reddish), 8000K (the most bluish) 5500K, 6500K,
7000K, 8000K
B STRETCH Emphasizes the black color.
[OFF] (standard), W (weaken),X (strengthen) OFF, 1 to 10
W STRETCH Emphasizes the white color.
[OFF] (standard), W (weaken),X (strengthen) OFF, 1 to 10
DISP MODE* Selects the displaying method.
[FULL]: Shows the input signal on entire screen.
[NORMAL]: Shows the input signal with original aspect ratio. FULL, NORMAL
SHARPNESS** Sharpens the edge horizontally.
W (soften characters and lines), X (sharpens characters
and lines) 1 to 10