Important – FUJITSU Disk Storage System DX60 User Manual
Page 73
Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
73
Copyright 2012 FUJITSU LIMITED
P3AM-5512-03ENZ0
(2) Connect the plug to be connected to DI (IN) port, to the DI (IN) port of the expander
0 (EXP#0).
5-2
For a dual-controller type, connect the DI (OUT) port at controller 1 (CM#1) of controller
enclosure, to the DI (IN) port at expander 1 (EXP#1) of the drive enclosure 1 with the
miniSAS cable.
Connect the miniSAS cable in the same way as
The following shows the miniSAS connection figure between controller enclosure and
drive enclosure.
-
For a single-controller type
IMPORTANT
Do not connect anything to the DI (OUT) port on the drive enclosure.
Drive enclosure
Controller enclosure
Drive enclosure
CM#0
EXP#0