FUJITSU Disk Storage System DX60 - Manual (Page 4)

ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-
4
Copyright 2012 FUJITSU LIMITED P3AM-5512-03ENZ0
About this Manual
Organization
This document is composed of the following seven chapters and two appendices:
●
Chapter 1 Components
This chapter describes the components of the ETERNUS DX60 S2 Disk storage system.
●
Chapter 2 Standard Operations
This chapter explains how to turn on and off the ETERNUS DX60 S2 Disk storage system
and how to operate the buttons on the operation panel.
●
Chapter 3 Setup
This chapter describes the required settings and notes for operation of the ETERNUS DX60
S2 Disk storage system.
●
Chapter 4 Operations
This chapter describes the LAN for operation management of the ETERNUS DX60 S2 Disk
storage system and explains how to monitor the status of the ETERNUS DX60 S2 Disk
storage system.
●
Chapter 5 Installing Optional Products
This chapter describes how to install optional products.
● Chapter 6 Maintenance
This chapter describes maintenance for the ETERNUS DX60 S2 Disk storage system.
●
Chapter 7 Troubleshooting
This chapter explains troubleshooting when errors occur in the ETERNUS DX60 S2 Disk
storage system.
"Event Notification Message List" and "Event (SNMP Trap) Display When Using ServerView
Operation Manager" are described as appendices.