FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 68)

43
3.3 Cleaning the Rollers
3
D
A
IR
Y CARE
7. Place the same cleaning sheet on the hopper table with adhesive side up by
aligning the right side with the hopper guide. Press (Start button), then the
cleaning sheet is fed.
8. When "Hopper Empty" is displayed, press (Cancel) button.
9. Remove the protective paper from a new cleaning sheet and place it with the
adhesive side face down.
Repeat steps 5 through 8. When the cleaning is completed turn off the power.