Ap-3 – FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 266
● AP-3
Detection by Document Thickness and Length
Sheets of the same thickness and length shall be set in the
ADF at a time.
-
Document length: 0.065 to 0.15mm
-
Document length deviation: 1% or less
-
Printed area: 12% or less
-
No black printed areas are allowed at the center area (26 x 10mm) at the
leading edge of the document.
-
Punched holes are not allowed within 35mm of the vertical
center line of the
document.
-
The deviation in the amount of the light transmitted through background areas
must not be less than 10%.
HINT
The type and the conditions of document
and the conditions
sometimes cause the
double-feed detection rate to drop.
This manual is related to the following products: