FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 249)

226
7.5 Test Mode Details
(4) At , select the right most item, [200] in the sample screen, and press
(Enter button). Then the LCD display shows .
At this screen, press (Left arrow button) or (Right arrow button)
and select scan resolution. Following parameters can be specified.
Press (Enter button) and confirm the setting. Then is
redisplayed.
(5) Press (Enter button). Then is redisplayed.
At , select [START] and press (Start button).
If fi-486PRFR and/or fi-486PRREis installed, is displayed for you to
setup imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
200: Scan at 200 dpi
240: Scan at 240 dpi
300: Scan at 300 dpi
400 sheets: Scan at 400 dpi
2 0
E O S L U O T I N R
0
e O = f / f O : P n r
n r P i t
o / s t P