FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 201)

178
7.3 Setup Mode Details
6. Setting Skew Check
1) Pressing (Next button) or (Previous button) and let the LCD show .
2) If you want to enable Skew check at , press (Left arrow button), and
select [On].
To disable Skew-check, press (Right arrow button) and select [Off] then press
(Enter button).
3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready] screen.
0 6 k C S ! h e w
=
e c k
O n O f f /