FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 250
227
7.5 Test Mode Details
7
SETUP MODE
5) At
(Left arrow button) or
(Right arrow button) and:
Select [On] to do imprinter test while scanning.
Then, select the imprinter to use.
If the printer to use is fi-486PRFR, select [Pre].
If fi-486PRRE, select [Post].
If imprinter test is not required, select [Off] .
6) Press
(Start button). Scanning operation starts with or without imprinter test.
HINT
If you want to quit, press
(Stop button).
The LCD goes back to
This manual is related to the following products: