Loading the data using scsi, Load the data saved on one removable disk, Press the setup key – Fostex D1624 User Manual
Page 94: Press the execute/yes key, Press the stop button or the exit key, The recorder will enter the setup mode, Completed!” will turn off
D824/D1624 Reference Manual (Saving and Loading Song Data)
94
44.1kHz
SETUP
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SURE?
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
LOAD
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
Loading the data using SCSI
Here you are loading on the current drive, the data of each program or the data of all programs
saved on the backup purpose SCSI disk. The prerequisite is that a backup SCSI drive is connected
to the recorder.
Load the data saved on one removable disk.
Load the program with the “Load PGM?” menu in the SETUP mode. This assumes that a saved disk
is inserted in the backup purpose SCSI drive.
* Input format available
: adat, DAT, SCSI 6
* Programs available
: P01 - P99
* Track available
: When using an adat or DAT: Tracks 1-8, Tracks 1-16, Tracks 1-24,
Tracks 9-16,
Tracks 9-24, Tracks 17-24;
When using a SCSI disk: All tracks will be automatically selected.
1.Press the SETUP key.
The recorder will enter the SETUP mode.
2.Use the JOG dial to select “Load PGM?,” and press
the EXECUTE/YES key.
An indication of the type of the digital signal to be loaded
will flash on the display.
3.Rotate the JOG dial to select a flashing “SCSI 6,”
and press the EXECUTE/YES key.
The external digital device is set to “SCSI 6,” and the
existing Song numbers will flash on the display.
4.Rotate the JOG dial to select the back up number
to load.
You can choose to load any existing Song individually
or all Songs collectively.
The display indication differs as follows depending on
whether you selected an individual Song number or all
Song numbers.
5.Press the EXECUTE/YES key.
Song data will be loaded to the selected Program.
If, for example, backup 1 is started for Program 1, then
“B01 >> P1 ***MB” will appear, “REMAIN” lights up,
load proceeds, and “***MB (program size)” is counted
down, when individual programs are loaded.
When the load operation is complete, “COMPLETED!”
will light and the recorder will display the Time Base
that was shown before the unit entered the Setup mode.
Turning the JOG dial in this state makes it possible to
select another program, other than the above, on the
current drive. The size of the program appears when
the program is selected.
If you select a program that is already recorded with
data and load is executed for the load destination, the
existing data is deleted while loading takes place.
If you do not want to overwrite the existing data, select
“New PGM” mentioned above, prior to loading.
When the load operation is complete, “COMPLETED!”
will light and the recorder will display the Time Base
that was shown before the unit entered the Setup
mode.
6.Press the STOP button or the EXIT key.
“COMPLETED!” will turn off.
You cannot abort a load operation on a SCSI device
while it is in progress.