Fostex D1624 - Manual (Page 36)

36
D824/D1624 Reference Manual (Handling Programs)
P01 P02 P03 P04 P05 P06 P07
P01 P02 P03 P04 P05 P06
If you try to deleted PGM 05, only the
data of PGM 05 will be deleted and the
data of PGM 06 will move into PGM 05.
After deleted
P 01 P 02 P 03 P04 P 05 P 06 P 07 New Program?
You can select from “PGM 03” up to
“New PGM ?” in this direction.
42 ∞
_
OL 0
8 7 6 5 4 3 2 1
30
24
18
12 9
6
3
16 15 14 13 12 11 10 9
42 ∞
_
OL
0
8 7 6 5 4 3 2 1
30
24 18
12
9
6
3
16 15 14 13 12 11 10 9
Using a Program Change function
If multiple Programs exist on the disk, you need to select a Program to record, play, or edit.
This section describes how to select a Program.
You cannot use the Program Change function when the recorder is in SETUP mode.
1. When the recorder is stopped, press the PGM
key.
[Select PGM] appears on the display briefly, then changes
to a flashing “01” ([#0001 of PGM 01) and [SURE?] flash.
([#0001] is the default name of PGM 01.)
2. Turn the JOG dial to select the desired
Program number (flashing).
Rotating the JOG dial counter-clockwise decreases the
number, and rotating it clockwise increases the number.
If you turn the JOG dial clockwise all the way, [New
Program?] will be selected. Select [New Program ?] to
create a new Program as mentioned in the previous
section “Creating a new Program.”
For example, you can select one of seven Programs as
follows:
3. Press the EXECUTE/YES key.
The ABS Time Base indication for the selected Program
appears.
In this way, you can be sure to select a Program before
you start working.
You can select from “PGM 01”
up to in this direction.
Deleting a Program
This section explains how to delete an unnecessary Program.
Deleting an unnecessary Program will expand the recordable area, making your work flow more
smoothly, since recording or editing requires sufficient recordable area (free space on the disk).
Use the [Delete PGM ?] menu in SETUP mode to delete a Program.
• You can delete only the currently-selected Program. Refer to the
previous section, “Using a Program Change function,” for
information on how to select the desired Program before you
proceed to delete the Program.
• If only one Program exists and you try to delete it, data contained
in the Program will be deleted, but the Program itself will remain.
For example, assume that PGM 01 -07 exist and you try to delete
PGM 05. Program number 05 will remain, but the data inside PGM
05 will be replaced with the data of PGM 06.
The subsequent Programs’ data will move in the same way.
Therefore, it will appear that PGM 07 has been deleted.
If you delete the last Program (PGM 07 in this example), PGM 07
will be completely deleted.
If you try to deleted PGM 05, only the data of PGM 05 will be deleted
and the data of PGM 06 will move into PGM 05.
You cannot use the Single Undo/Redo function, and Multiple Undo function to delete Programs. Make sure that you
delete the correct Program.
Flashing