Fostex D1624 - Manual (Page 28)

28
D824/D1624 Reference Manual (Before Starting)
ABS 0 REC END
Recorded part Silence
Audio File 1 Audio File 2 Audio File 3 Audio File 4 0 File 1 0 File 2
ABS 0 REC END
Recorded part (shortest: 740 msec., FS=44.1kHz)
Unrecorded part (shortest: 740 msec., FS=44.1kHz)
ABS 23h 59m
0 1 2 3 4 5 6 7 8 9 10 11 Event Number
Audio file and event
During recording, the recorder consecutively records an independent audio file (recorded area) in
each track of each Program. However, you can record data on the recorder at any point within 24
hours of ABS time, and you can intentionally create silence between two audio files. In this case, a
silent part is counted as a 0 file.
Therefore, audio files and 0 files are consecutively created as shown in the diagram below.
The total number of these audio files and 0 files is called “the number of events.” The maximum
number of events is 512 per track (tracks 1-24). After the number of events reaches 507, new data
will not be recorded.
Usually, an event is created by one recording or edit. The number of events increases or decreases
depending on the number of edit points or the amount of disk free space. (The recorder disk
management operates in such way that the number of events will decrease.) The number of events
does not affect usual music production. However, if a small amount of single-track data is written
in many different sections on the disk, the maximum number of events may be reached. To avoid
this “event number overflow,” you need to check the number of events for each track.
The recorder provides an event check menu in Setup mode for this purpose.
During analog recording, “0 files” are not created since silence does not create “data 0.” However, during S/P DIF
and adat digital recording, the recorder records “data 0” (this is called “mute recording”). When one second of
consecutive data 0 is input to the recorder, it creates a “0 file” and limits the consumption of disk space. However,
repeating this operation will eventually increase the number of events, leading to “event number overflow.”
What is an event?
As shown in the diagram below, the number of events can be eleven or more if partial recordings
are made. This is because an unrecorded part is regarded as an event, and a recorded part is also
regarded as an event(s). The duration of each event can vary from 740 msec to 23 hours 59
minutes 59 seconds (FS =44.1kHz).
An unrecorded part (zero file) is always regarded as one even, regardless of its duration.
However, a recorded part can consist of a group of multiple audio file, as shown in the diagram
below. More precisely, one audio file will be divided into multiple audio files if perform many
editing operations (such as , copy & paste, move & paste, etc.) on this audio file. Multiple audio files
created in this way are regarded as events. (If you do not edit the data at all, the audio file remains
in one piece and is regarded as one event.)
In this example, one recorded area consists of six consecutive audio files. This means that this part
consists of six events.