FOCUS Enhancements MR-HD100 - Manual (Page 37)

Quick Start
MR-HD100 Media Recorder
17
Powering the MR-HD100
Connecting the MR-HD100 to AC Power
The MR-HD100 can operate with the battery installed or
uninstalled while connected to the MR-HD100 power adapter.
To do this, connect the AC power as follows:
1. Plug the cord from the power supply into the Power
connector of the MR-HD100.
2. Connect the line cord to the rectangular power supply.
3. Plug the line cord into an electric outlet.
Battery Operations
Before operation with battery power, it is first necessary to fully
charge the battery.
Installing a Battery
1. Place the MR-HD100 so that the unit is face up.
2. Position the battery pack, so that the connector tab is on
the upside.
The connector tab must align with the power tab on the
inside the MR-HD100.
3. Slide the battery forward, into the MR-HD100 until it
latches.
The MR-HD100 uses close tolerances to create a friction fit
that holds the battery firmly in place.
Battery