FOCUS Enhancements MR-HD100 User Manual
Page 113
MR-HD100 Media Recorder
93
• FREE RUN
This function causes the MR-HD100 to begin counting from
the value stored by
TC SET
. To enter a value in
TC SET
:
1.
Go to the
SETUP
menu.
2.
Select the
TC SET
item.
3.
Enter values using the Right soft key and Scroll Wheel.
4.
Press the Select button to enter values and return to the
SETUP
menu.
A number entered via
TC SET
is not stored or the MR-
HD100 begins counting using that number, until it is
selected and the display returns to the
SETUP
menu.
• REGEN
When the MR-HD100 powers up in
REGEN
mode, it:
• Reads the timecode of the last track recorded.
• Adds 1 to the number.
• Stores the new timecode as the number that will be
assigned to the first frame of the next recording session.
If the drive is empty, i.e. no existing recordings, the MR-
HD100 uses the
TC SET
value.