FOCUS Enhancements MR-HD100 - Manual (Page 36)

Quick Start
MR-HD100 Media Recorder
16
DV Audio
Audio is embedded in the FireWire signal.
•
DV25
2-ch (16-bit, 48kHz)
4-ch (12-bit, 32kHz) -- Available in the Raw DV NFR file
format only.
• HDV
2-ch MPEG 1, Layer 2
Computer I/O - USB 2.0
The USB 2.0 connector is for all data (asynchronous) I/O:
• Connect with computers at up to 480Mb/s.
Actual performance depends on type of network and
network activity. Best performance is achieved when the
MR-HD100 is connected to the computer’s USB 2.0 port.
• Networks wired or wireless.
Depending on the type of network, it is necessary to use an
USB adapter: USB 2.0 to Ethernet or USB Wireless Network
(802.11b or g) dongle.
Network settings are made in the MR-HD100 System
Setup
menu, see Network on page 65.
The MR-HD100 auto detects the type of connection being
made provided it is set up correctly or in
HDD mode.
Not All Frame Rates Are Supported With All NFR File
Formats.
Check the Focus website for the latest compatibility information:
www.focusinfo.com.