FOCUS Enhancements MR-HD100 User Manual
Page 185
MR-HD100 Media Recorder
165
6.
Put the MR-HD100 into
Record
mode and start recording.
The Settings page on the iPod now shows:
•
MR-HD100 Status is recording,
•
Current timecode,
•
The number of the track being recorded,
7.
Click on
Clip Info
.
The iPod displays the Clip info page with the template’s
metadata fields and/or their buttons. If Friendly Names
were assigned early, they appear.
This page is for logging clip-based - non TC Depend,
timecode dependent -- metadata.
8.
Enter the metadata:
•
For open data fields, click on the field: depending on
the data type, the iPod keyboard or number pad
appears.
•
For metadata buttons, click on the button to display a
dropdown menu with its predefined values. Pick the
appropriate value.
9.
Click
Done
. (Not shown in illustration.)
The data is fixed in the field and it is now possible to go
on to other metadata fields.
10.
Repeat Steps 7, 8, and 9 until all metadata is specified.
11.
Click one of the
Update
buttons.
The metadata is associated with the clip and immediately
uploaded and saved in the MR-HD100 database. This
metadata applies to the entire clip.
11
7
8