FOCUS Enhancements MR-HD100 User Manual

Page 162

MR-HD100 Media Recorder
142

When clips exceed 9 minutes in length, the MR-HD100
automatically creates a new, file without dropping any frames. The

two files have the same root filename but have different two digit
suffixes that indicate the order of their creation, -01, -02, and so on.

This process can produce as many sequential 2GB files as the drive
can hold.
With most NLE systems it is possible to use clips within the
timeline. Select the clips on the source volume, i.e. the connected

MR-HD100, and import them directly into the NLE bin.
This makes clips immediately available in the NLE timeline.
The high transfer speed of the MR-HD100 drive permits direct

streaming of the clips to the NLE, thus eliminating the need to

copy or transfer the clips before their use.

UDF

UDF does not have the 2GB limitation on file size which permits
the MR-HD100 to record clips of up to 1.5 hours in length.

UDF Perm Default Set to Read-Only.
When using Mac OS10.5 and UDF Perm is set to Read-Write, it may

take several minutes for the disk drive to mount on the computer.

Setting to Read-Only permits faster mounting times.

•

UDF and 720p 50/60 Quicktime Recording
The maximum record times in UDF mode for 720p50/60 QuickTime

recordings is 45 minutes in duration. Other UDF formats are 90

minutes.