Sample network topologies for non-pwr switches, As a desktop switch, Sample network topologies for non-pwr switches -28 – HP PROCURVE 2610 User Manual
Page 52: As a desktop switch -28
2-28
Installing the Switch
Sample Network Topologies for Non-PWR Switches
In
sta
llin
g
th
e
Sw
itc
h
Sample Network Topologies for
Non-PWR Switches
This section shows a few sample network topologies in which the Switch 2610
is implemented. For more topology information, see the ProCurve networking
products Web site,
.
As a Desktop Switch
Figure 2-20. Basic desktop configuration
The 2610 Switches are designed to be used primarily as desktop switches to
which end nodes, printers, other peripherals, and servers are directly
connected, as shown in the above illustration. The end node devices are
connected to the switch by straight-through or crossover twisted-pair cables.
Either cable type can be used because of the Auto-MDIX feature on the 2610
Switches ports.
Switch 2610-48
PCs and
peripherals
Server
Twisted-pair
straight-through
or crossover
cables
Gigabit
fiber-optic cable
to backbone