HP PROCURVE 2610 - Manual (Page 55)

2-31
Installing the Switch
Sample Network Topologies for Non-PWR Switches
In
sta
llin
g
th
e
Sw
itc
h
The simpler desktop and segment networks shown in the previous two
examples can easily be combined and expanded. For example, you could use
a ProCurve Switch 5406zl to interconnect each of your smaller switched
workgroups to form a larger switched network. All the devices in this network
can communicate with each other. For example, with Gigabit-SX Mini-GBICs
installed in a Mini-GBIC Module, in the Switch 5406zl, the entire switched
topology could be connected to a campus backbone, as shown in the
illustration above.
N o t e In the Figure 2-22, the 1000 Mbps fiber-optic connection between the Switch
2610s and the Switch 5406zl is by way of a Gigabit-SX mini-GBIC installed in
the Switch 2610s connected to a Gigabit SX mini-GBIC installed in the mini-
GBIC Module in the 5406zl.