Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface - Manual (Page 88)

instALLAtion AnD connection
DMM8 MANUAL 88
6 Installation and connection
The following steps are required for installation and connection of the
DMM8 U (UL, ULD):
1. Installation
2. Cascade devices (optional)
3. Connecting microphones and accessories
4. Connect to the mains power supply
6.1 Installation
To install the device, proceed as follows:
Step Description
1 Mount the device into your 19" rack using 4 appropriate rack
bolts.
Ensure that the device is securely screwed onto the rack.
Alternatively, the device can be positioned on a stable sur-
face.
6.2 Cascade devices (optional)
Caution: Risk of damage
It is only permitted for this connection to be carried out by authorized, qual-
ified personnel.
It is not permitted to connect the first device in the cascade to the last
device.
For the cabling (cascading) of the individual devices via the expansion sock-
ets, see
8.4 Cascading devices on page 117
6.3 Connecting microphones and accessories
Read the user instructions for your microphones and accessories for con-
nection.