Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface - Manual (Page 113)

fUnctionAL Description
DMM8 MANUAL 113
To do this, the PRESET function is selected on the SYSTEM CONTROL .
In addition to the 6 device presets, there is also a work preset: All changes
in the settings initially only have an effect on that preset. To store changes
permanently, the work preset must be stored under one of the available
device presets. Loading a device preset overwrites the work preset and
makes it active immediately. After re-starting the device, the last work preset
becomes active with the last settings made.
The 6 input rotary knobs provide access to the presets, and their configura -
tion.
Figure 51: PRESET configurations
If only LED 1 lights on an LED ring, this storage location is not configured
(see Figure 51 , encoder IN 3 ).
If all LEDs and the red PEAK LED are lit, this storage location is assigned
and selected (see Figure 51 , encoder IN 1 / USB L ).
If only LED 1 and the red PEAK LED are on, this storage location is assigned
but not selected (see Figure 51 , encoder IN 2 / USB R ).
For more information, see 8.7 Using presets on page 118.
8
ON PEAK
9
10
11
12
13
14
15
7
6
5
4
3
2
1
IN 1 / USB L
EQ 250 Hz / 2.0 kHz
8
ON PEAK
9
10
11
12
13
14
15
7
6
5
4
3
2
1
IN 3 / DANTE 1
EQ 500 Hz / 4.0 kHz
8
ON PEAK
9
10
11
12
13
14
15
7
6
5
4
3
2
1
IN 2 / USB R
EQ 350 Hz / 2.8 kHz