Troubleshooting – Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface User Manual
Page 130

troUbLeshooting
DMM8 MANUAL
130
PROBLEM
POSSIBLE CAUSE
REMEDY
Distorted signal repro-
duction
Pre-amplification not set correctly
Set gain control on rear panel to cor-
rect pre-amplification
Volume control turned up too far
Turn down volume
Input signal level too high
Reduce input signal
If the error persists despite these instructions, contact AKG Acoustics GmbH or your AKG dealer immediate-
ly.
This manual is related to the following products: