Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface - Manual (Page 86)

Description
DMM8 MANUAL 86
level. The following functions and parameters flow into the automix algo -
rithm:
• Dynamic level adjustment
• Best Mic On
• Noise Detect
5.5.1 Dynamic level adjustment
The master of all input channels is determined on an ongoing basis. This
value is used as the reference value.
If the input channel level is very close or over the reference value, this
channel will be assessed as dominant and will be slightly attenuated. If the
input channel level is well below the reference value, this is assessed as
ambient noise and be severely attenuated.
If a channel is no longer assessed as dominant, this falls at 1 dB/second and
all other nondominant channels increase with the same constant so that the
master output level remains constant. The upward adjustment of a channel
takes between 3 ms and 5 ms.
5.5.2 Best Mic On
With two microphones that are positioned close together there is the
disadvantage that comb filter effects may arise by canceling the frequency
components To suppress these unnaturally dull or hollow signals, only the
microphone channel with the highest level is assessed as dominant and
switched on.
5.5.3 Noise Detect
Permanently present interfering signals, whose amplitude are large enough
to be assessed as dominant, but whose level and frequency changes are
too low, are not assessed as dominant.
Interfering signals such as noise from fans and air-conditioning units are
recognized and not used as activation criteria for microphone channels.
5.6 Expansion/cascading
Up to ten devices can be cascaded if the number of inputs on a single de-
vice are not sufficient.
Level adjustment
Best Mic On
Noise Detect
Expansion for
cascading