Functional description, System control – Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface User Manual
Page 110
fUnctionAL Description
DMM8 MANUAL
110
7.4.13 EQUALIZER
Figure 47: EQUALIZER function
The function
EQUALIZER HIGH
and
EQUALIZER LOW
affects the output
OUT
: The adjustment is the same for the left and right channel.
If the
EQUALIZER HIGH
function is selected, the top specified value is
actuated; if the
EQUALIZER LOW
is selected, the bottom specified value is
actuated.
E.g.: At EQ 250 Hz / 2kHz, the frequency 250 Hz is actuated in the
EQUALIZER LOW
function. In the
EQUALIZER HIGH
function,, the frequen-
cy 2 kHz is actuated.
The room equalization can be performed in 12 bands. The raising or lower-
ing of the bands is performed by the 6 rotary knobs for the input channels.
The adjustment range extends from +/-14 dB. Only the upper middle LED
lights up with linear adjustment. More LEDs light up on the left side as the
rotary knob is turned
EQUALIZER
PRIORITY
PAN / BALANCE
DELAY
ROUTE TO REC
ROUTE TO USB
EQUALIZER LOW
EQUALIZER HIGH
PRESET
IN USB / DANTE
AUTOMIXING
COMPRESSOR
LIMITER
LOW CUT
BASS
TREBLE
LEVEL
LOCKED
SYSTEM CONTROL
PRIORITY
PAN / BALANCE
DELAY
ROUTE TO REC
ROUTE TO USB
EQUALIZER LOW
EQUALIZER HIGH
PRESET
IN USB / DANTE
AUTOMIXING
COMPRESSOR
LIMITER
LOW CUT
BASS
TREBLE
LEVEL
LOCKED
SYSTEM CONTROL