Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface - Manual (Page 67)

INHALT
DMM8 MANUAL 67
1 GENERAL 70
1.1 Purpose of the manual 70
1.2 Retention of the manual 70
1.3 Liability 70
1.4 Warranty 70
2 SCOPE OF SUPPLY 71
2.1 Packing unit 71
2.2 Optional accessories 71
3 SAFETY AND ENVIRONMENT 72
3.1 Safety 72
3.2 Required knowledge and areas of
responsibility of the operators/users
73
3.3 Explanation of the symbols used 73
3.4 Correct use 74
3.5 Incorrect use 74
3.6 Environment 74
4 DECLARATION OF CONFORMITY 74
5 DESCRIPTION 75
5.1 Summary 75
5.2 Technical data 75
5.3 Front: Description of the controls 77
5.3.1 Controls for input channels 77
5.3.2 Operating mode / SYSTEM CONTROL 78
5.3.3 Control for stereo outputs 78
5.3.4 Modulation display for stereo outputs 78
5.3.5 Stereo headphone output 78
5.4 Rear: Description of the controls 79
5.4.1 Inputs 80
5.4.2 Gain control 80
5.4.3 Stereo master output 81
5.4.4 Stereo record output 81
5.4.5 Serial control via RS232 81
5.4.6 USB port 82
5.4.7 LAN port 82
5.4.8 Expansion/cascading 83
5.4.9 Phantom power 83
5.4.10 Dante™ network 85
5.5 Automix algorithm 85
5.5.1 Dynamic level adjustment 86
5.5.2 Best Mic On 86
5.5.3 Noise Detect 86
5.6 Expansion/cascading 86
6 INSTALLATION AND CONNECTION 88
6.1 Installation 88
6.2 Cascade devices (optional) 88
6.3 Connecting microphones and
accessories
88
6.4 Connect to the mains power supply 89
7 FUNCTIONAL DESCRIPTION 90
7.1 Control concept 90
7.2 Operation of the rotary knobs 90
7.2.1 Display of the audio level / VU
function
91
7.3 SYSTEM CONTROL 91
7.3.1 SYSTEM CONTROL functions 91
7.3.2 Input channel modes 92
7.3.3 Output channel modes 92
7.3.4 Functions of the stereo headphone
output (monitoring output)
92
7.4 DSP functions 93
7.4.1 LEVEL 93
7.4.2 TREBLE 94
7.4.3 BASS 96
7.4.4 LOW CUT 98
7.4.5 LIMITER 100
7.4.6 COMPRESSOR 102