Operating the device – Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface User Manual
Page 119
operAting the Device
DMM8 MANUAL
119
Step Description
1
With
SYSTEM CONTROL
, select the
PRESET
function
2
Briefly press the rotary knob for the corresponding input or
output.
• An acoustic signal (beep) is sounded.
3
Release the rotary knob after the beep
• Device preset is loaded to work preset.
• Settings for the selected device preset are active immedi-
ately (all LEDs lit).
8.7.2 Programming a preset
To program a preset, proceed as follows:
Step Description
1
With
SYSTEM CONTROL
, select the
PRESET
function
2
Press input rotary knobs (1 to 6) for between 3 and 5 seconds
• An acoustic signal (beep) is sounded.
3
Release the rotary knob after the beep
• The current settings from the work preset are stored under
the selected device preset (all LEDs lit).
8.7.3 Deleting a preset
To delete a preset, proceed as follows:
Step Description
1
With
SYSTEM CONTROL
, select the
PRESET
function