Error messages – Sony VCT-SP2BP Camcorder Shoulder Support User Manual
Page 46
46
Error Messages
When a problem occurs, one of the following error messages may appear on the display.
Message
Meaning
Solution
EEP ERROR
An error has occurred in the backup memory data.
Contact your point of purchase or Sony service
representative.
PLL ERROR
An error occurred in the PLL synthesizer circuit.
Restart the unit. If the message persists, contact your
point of purchase or Sony service representative.
NO TONE
Audio signal output has been muted, because a tone
signal different from the compander mode configured
on the tuner was received.
Configure the compander mode for the transmitter you
are using (see “Setting the compander mode
(COMPANDER)” (
or
).
When operating in conjunction with UWP-D series
transmitters (UTX-B40, UTX-M40, etc.), set the tuner
and the transmitters to the same compander mode.