Sony VCT-SP2BP Camcorder Shoulder Support - Manual (Page 10)

10
• If a lavalier microphone other than the one supplied is
connected, the proper performance may not be
obtained.
e Display section
A RF transmission indicator
Displays the current transmission status.
B RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 42).
C Audio input level meter
Displays the audio input level.
D Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
E Input level indicator
Displays the input level status.
: Microphone input
: Line input
F Muting status indicator
Displays an icon when the muting function is on.
For details about the muting function, see “Setting the
operation of the audio muting function (MUTE
SETTING) (UTX-B40/P40 only)” (page 42).
G Battery level indicator
Displays the battery level. “USB” is displayed when
power is supplied from the USB connector.
For details, see “Battery level indicator” (page 19).
H Menu display section
Displays various functions. Press the + or – button to
switch functions.
For details, see “Configuration menu” (page 41).
I Gain mode indicator
Displays the gain mode setting.
For details, see “Setting the audio gain (GAIN MODE)”
(page 41).
f + or – button
Selects functions or values shown on the display.
g Infrared detector
Receives the frequency and compander mode set on the
tuner.
h N-Mark
Receives the frequency and compander mode set on the
tuner. It also notifies the tuner about the frequency and
compander mode set on the transmitter.
i Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see “Power
Supply” (page 18).
j MUTE button
Turns the muting function on/off. You can change the
muting function on/off control method in the
configuration menu.
For details about switching the muting function on/off,
see “Setting the operation of the audio muting function
(MUTE SETTING) (UTX-B40/P40 only)” (page 42).
k SET button
Adjusts displayed function settings and enters the
displayed value.
Holding down the SET button while turning on the power
turns the transmitter on without transmitting a signal
(transmission stopped mode).
l USB connector (USB Type-C
®
)
Connect to a commercially available USB portable power
supply.
When a USB portable power supply is connected while
the power is turned on, the unit automatically operates
with power supplied by the USB portable power supply.
m POWER button
Turns the power on/off.
: Transmitting
– : Transmission stopped
Function Operation
Supply ON Press button for one second or
longer
Supply OFF Press button until the indicator turns
off