Yamaha CVP-705B - Manual (Page 95)

CVP-709/CVP-705 Owner’s Manual 95
C
on
n
ec
tio
n
s – U
sin
g Y
our I
n
str
u
men
t w
ith
O
th
er
D
ev
ices
–
Using an External Stereo System for Playback
You can connect a stereo system to amplify the instrument’s sound by using the AUX OUT [L/L+R]/[R]
jacks. The microphone or guitar sound connected to the instrument’s [MIC/LINE IN] jack is output at the
same time.
NOTICE
• To avoid possible damage, first turn on the power to the instrument, then to the external device. When turning off the power,
first turn off the power to the external device, then to the instrument. Since this instrument’s power may automatically be
turned off due to the Auto Power Off function (page 19), turn off the power to the external device, or disable Auto Power Off
when you do not intend to operate the instrument.
• Do not route the output from the [AUX OUT] jacks to the [AUX IN] jacks. If you make this connection, the signal input at the
[AUX IN] jacks is output from the [AUX OUT] jacks. These connections could result in a feedback loop that will make normal
performance impossible, and may even damage the equipment.
NOTE
• Use only the [L/L+R] jack for connection with a monaural device.
• Use an appropriate adaptor plug if the input jack of the powered speaker does not match the phone plug of the audio cable.
• Use audio cables and adaptor plugs having no (zero) resistance.
CAUTION
Avoid looking at the television or video monitor for prolonged periods of time since doing so could damage your eyesight. Take
frequent breaks and focus your eyes on distant objects to avoid eye strain.
By connecting with an external monitor such as a television to the [RGB OUT] terminal of the instrument,
the lyrics and text on the instrument’s display can be shown on the television or the monitor.
Minimizing noise of the input sound via Noise Gate
By default, this instrument cuts unwanted noise from the input sound. However, this may result in wanted sounds also being cut,
such as the soft decay sound of a piano or acoustic guitar. To avoid this, set the Noise Gate to off via [Menu]  [Utility]  [Speaker/
Connectivity]  [AUX In Noise Gate].
Connecting an External Monitor ([RGB OUT] terminal)
Instrument Powered speaker
Audio cable
Audio signal
Phone plug
(standard) Phone plug
(standard)
Input jack
Mini D-sub 15-pin
External monitor Instrument