Voices – playing the keyboard, Playing preset voices, Voices – Yamaha CVP-705B User Manual
Page 48: Playing the keyboard
CVP-709/CVP-705 Owner’s Manual
48
V
oice
s – Pla
yin
g the K
eyboar
d
–
Voices
– Playing the Keyboard –
The instrument features a wide variety of exceptionally realistic instrumental Voices, including piano,
guitar, strings, brass, wind instruments and more.
The Voices can be played via three keyboard parts: Main, Layer and Left. These playing modes allow you to
play just one single Voice (Main), play two different Voices in layer (Main and Layer), or play different
Voices in the right- and left-hand areas of the keyboard (Main/Layer and Left). By combining these three
parts, you can create luscious instrument textures and convenient performance combinations.
NOTE
You can also play only the Layer part by turning the Main part off.
When the Left part is turned off, the entire keyboard is used for the Main and Layer parts. When the Left
part is turned on, the F
P
2 and lower keys are used for the Left part while the upper keys (excluding F
P
2) are
used for the Main and Layer parts. The key which divides the keyboard into the left-hand and right-hand
areas is referred to as “Split Point” and its guide lamp lights when the Left part is turned on. The Voices of
the parts which are turned on can be confirmed on the Home display.
NOTE
The Split Point can be changed (page 50).
1
Select the keyboard part then call up the Voice Selection display.
Do this to select a Voice for each keyboard part.
Touching the display
1-1
On the Home display, touch [Main], [Left], or [Layer] to turn on the desired keyboard
part.
The center of the display shows the keyboard parts which are turned on and their corresponding
Voices.
1-2
Touch the Voice of the desired part to call up the Voice Selection display.
Playing Preset Voices
Left part
Layer part
Main part
Split Point (F#2 as default)
Keyboard parts
which are turned on
and their Voices
On/off status of the
keyboard parts