Yamaha CVP-705B - Manual (Page 88)

CVP-709/CVP-705 Owner’s Manual 88
Reg
ist
ra
tion
M
emo
ry
–
S
av
in
g and
Reca
llin
g C
u
st
om
P
ane
l S
etups
–
Registration Memory
– Saving and Recalling Custom Panel Setups –
The Registration Memory function allows you to save (or “register”) virtually all panel settings to a
Registration Memory button, and then instantly recall your custom panel settings by simply pressing a
single button. The registered settings for eight Registration Memory buttons should be saved as a single
Bank (file).
1
Set up the panel controls (such as Voice, Style and so on) as desired.
Refer to the separate Data List for a list of parameters that can be registered with the
Registration Memory function.
2
Press the [MEMORY] button in the REGISTRATION MEMORY section to call up
the Registration Memory window.
3
Press the desired REGISTRATION MEMORY [1] – [8] button to which you wish to
memorize the panel setup.
Memorized buttons are lit in red, indicating that the number button contains data and its
number is selected.
NOTICE
If you select the button whose lamp is lit in red or green here, the panel setup previously memorized to the button
will be erased and replaced by the new settings. Hence, you should memorize panel setups only to buttons that are
turned off.
Registering Your Panel Setups
Selecting the items to be registered
Touching [] at the bottom left of the window calls up the list for selecting the items to be registered.
Before going on to step 3, enter or remove checkmarks by touching the desired items. Items having
checkmarks will be registered.
About the lamp status
• Red: Data registered and currently selected
• Green: Data registered but not currently selected
• Off: No data registered
Displays or hides the list of items