Yamaha CVP-705B User Manual

Page 114

CVP-709/CVP-705 Owner’s Manual

114

ble

tin

Pedal/AUX Pedal

The damper, sostenuto and soft functions do
not work for the relevant pedals.

The pedal cord plug is not connected. Securely insert the pedal cord plug
into the proper jack (pages 103, 107, 110).

Make sure that each pedal is properly assigned to “Sustain,” “Sostenuto”
and “Soft” (page 38).

The on/off setting of the footswitch
connected to the [AUX PEDAL] jack is
reversed.

Turn the instrument’s power off, then turn it on again without pressing the
footswitch, or change the Polarity parameter from [Menu]  [Assignable]
 [Pedal].

The damper pedal does not function properly.

The power of the instrument may have been turned on while the damper
pedal was pressed. Press and release the damper pedal to restore proper
operation.

AUX IN jack

Sound input to the [AUX IN] jack is
interrupted.

The output volume of the external device connected to this instrument is
too low. Increase the output volume of the external device. The volume
level reproduced via this instrument’s speakers can be adjusted by using
the [MASTER VOLUME] control.
The Noise Gate function may be cutting the soft sounds. If this happens,
turn off the “AUX In Noise Gate” parameter (page 95).

This manual is related to the following products:

CVP-709B