Yamaha CVP-705B - Manual (Page 49)

CVP-709/CVP-705 Owner’s Manual 49
V
oice
s – Pla
yi
n
g t
h
e
K
eyboa
rd
–
 Using the panel buttons
1-1 To select the keyboard part, press the VOICE [MAIN/LAYER/LEFT] button repeatedly
if necessary until the desired part’s lamp lights.
1-2 Press one of the desired VOICE category buttons to call up the Voice Selection display.
NOTE
• You can select Voices for the Main and Layer parts simply by using the Voice category selection buttons. While holding
down one of the Voice category selection buttons, press another Voice category selection button. The Voice
corresponding to the first pressed button is assigned to the Main part while the Voice of the second pressed button is
assigned to the Layer part.
• You can change the sub category by pressing the same Voice category button twice or more.
2
Touch the desired Voice.
NOTE
The “Others” tab contains XG Voices and so on. For details about how to select those Voices, refer to the Reference
Manual on the website (page 9).
3
Make sure that the desired keyboard part is turned on.
The on/off setting for the keyboard part can be made as described in step 1-1 in “Touching the
display” above.
4
Play the keyboard.
NOTE
The Voice settings can be memorized to Registration Memory (page 88).
To hear the characteristics of the Voices:
Touch (Demo) to start demo playback of the selected Voice. Touch (Demo) again to stop
playback.
Touch
(Information) to call up the Voice Information window, which may or may not be available
depending on the Voice.
NOTE
You can play the Demo also by touching the Demo icon which appears in the Information window.
1-1 1-2