Yamaha CVP-705B - Manual (Page 38)

CVP-709/CVP-705 Owner’s Manual 38
Bas
ic O
per
at
ion
s
3
Input the desired character one by one.
To delete a single character, touch [Delete]; to delete all characters at once, touch and hold
[Delete]. To enter a space, touch the space key indicated in the illustration on the previous page.
NOTE
• Depending on the display for character entry you are working in, some types of characters cannot be entered.
• A file name can contain up to 46 characters and a folder name can contain up to 50 characters.
• The following characters (half size) cannot be used: \ / : * ? " < > I
 To input letters with auxiliary symbols (when Language is set to other than Japanese):
You can input letters with auxiliary symbols such as umlaut by touching and holding a letter to call up a
list. For example, touch and hold “E” to enter “Ё” from the list.
 To convert into Kanji (when the Language is set to Japanese):
When the entered “hiragana” characters are shown in reverse display (highlighted), touch [ ]
several times to call up the conversion options. You can change the reversed area by touching [] or
[]. When you find the desired Kanji, touch [
].
To change the converted kanji back to “hiragana,” touch [ ].
To clear the reversed area at once, touch [ ].
NOTE
To cancel this operation, touch [Cancel] before going on to step 4.
4
Touch [OK] to finalize the characters (name, keywords, etc.) you have input.
NOTE
If the pedal box rattles or gives way when you step on the pedals, turn the adjuster so that it is set firmly against the floor (pages 104, 107,
110).
 Damper Pedal (Right)
Pressing this pedal sustains notes. Releasing this pedal immediately stops
(damps) any sustained notes. Pressing this pedal while you play a VRM Voice
(page 52) recreates the characteristic string resonance of a real acoustic piano.
A “half-pedal” function of this pedal creates partial sustain effects, depending
on how far down you press the pedal.
NOTE
• Certain Voices, such as strings and brass, sustain continuously when the damper/sostenuto
pedal is pressed.
• Certain Voices such as drum kits may not be affected by use of the damper/sostenuto pedal.
Half-pedal function
This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you
press the pedal, the more the sound sustains. For example, if you press the damper pedal and the notes you
play sound a bit murky and loud with too much sustain, you can partially release the pedal to lessen the
sustain (murkiness).
Using the Pedals
Damper Pedal
Sostenuto Pedal
Soft Pedal
If you press and hold the damper
pedal here, all the notes shown
will be sustained.