ATL Telecom OM100 User Manual

Page 35

ATL USER GUIDE

OM100 Optical Multiplexer

7.3

INFORMATION

Please quote these figures when contacting our technical support department.

Field

Description

Unit type

Displays the unit's product name and type.

Hardware Id

Indicates the build number for the hardware platform

Firmware Id

Relates to the firmware version being run

Software version

Displays the version number for the software being run

Booter version

Displays the version number for the boot-strap loader

Firmware version

Displays the version number for the firmware

OM100 Mon 01 Nov 2002 00:50:49

Information

Urgent Alarm:Off Non-Urgent Alarm:On

Subsystem: LT

Unit Type: OM100 1+1 SF SM

Hardware Id: 0

Firmware Id: 3

Booter Version: 1.00 2002 13 11 Bootstrap (OPT)

Software Version: 1.00 2002 11 13 OM100 App

Firmware Version: 1.00 2002 11 13 OM100 FPGA

Press Escape to Exit

F1 Help F3 Previous Menu F4 Main Menu

Information

Displays the designation of the unit.

ATL USER GUIDE
OM100 Optical Multiplexer

7.2.10

Front Panel

Field Description

Full Control Front panel buttons may be used for testing loops, and unit configuration

Loops Only Buttons can be used for testing loops, but not for unit configuration

Disabled Buttons are disabled

OM100 Mon 01 Nov 2002 00:42:19

Configuration > Front Panel

Urgent Alarm:On Non-Urgent Alarm:Off

Subsystem LT

Front Panel Buttons:

Full Control (*)

Loops Only ( )

Disabled ( )

Press Return to Accept or Escape to Cancel

F1 Help F3 Previous Menu F4 Main Menu F7 Previous Subsystem

F8 Next Subsystem

Configuration

Master / Slave

Master / slave configuration.

User Port

Configure each E1 port – enable.

Protection Switching

Configures the protection 1+1 switching.

System

Set date, time and menu timeout.

Subsystem Names

Enter name, description and location of this unit.

Monitoring Mode

Configures monitoring mode.

Software

Allows the downloading of software to the unit

and allows reset to factory default.

Serial Communications

Local terminal set-up – baud rate, parity, handshake.

Reboot

This option allows you to reboot the unit that you

are using, as well as its remote partner.

Front Panel

Allows configuration of Front Panel controls.