Calls – Quintum Technologies Call Routing Server User Manual
Page 48

P/N 480-0028-00-00
5-11
Chapter 5: Configure via Command Line Interface (CLI)
calls
Description:
A monitoring command to displays a log of incoming/outgoing calls, which
includes call source endpoint IP address and destination IP address.
Cmd Type:
Command.
Prompt Level:
Main Routing Server prompt.
Syntax:
calls
Availability:
All Releases of Tenor Routing Server
Examples:
Routing Server> calls -
lists the active calls on the system.
Sample Display:
Call Status Example
Id Connect Duration OrigIP OrigTrunk DNIS TermIP TermTrunk
00821286 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821289 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821288 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821291 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821287 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821290 2003-03-07 14:58:15 99.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821292 2003-03-07 14:58:16 98.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821293 2003-03-07 14:58:17 97.0 192.168.2.169 10 18472220169 192.168.2.169 0
00821294 2003-03-07 14:58:19 95.0 192.168.2.169 10 18472220169 192.168.2.169 0
Number of Active Calls: 9