Quintum Technologies Call Routing Server - Manual (Page 14)

P/N 480-0028-00-00 2-3
Chapter 2: Hardware Installation
Table 2-1 Input/Output 10/100 Ethernet
LAN 2 Port. Reserved for future use.
LAN Port 1 LEDs. The LAN port LEDs (for 10/100) display the health of the Ethernet connection. There are
two LEDs; see below for a description.
Figure 2-2 LAN Port 1: LED Definitions
Pin # Signal Definition Color
1 TX + Transmit Data White w/orange
2 TX - Transmit Data Orange
3 RX + Receive Data White w/green
4 RSVD Reserved Blue
5 RSVD Reserved White w/blue
6 RX - Receive Data Green
7 RSVD Reserved White w/Brown
8 RSVD Reserved Brown
LED Left LED Right LED Description
LAN Port 1 Unlit Unlit Network link not established.
Off Green 10 Mbps Ethernet Indication.
The Tenor unit detects the 10 Mbps Ethernet
link integrity signal indicating normal con-
dition.
Off Blinking
Green 10 Mbps Ethernet Activity.
Detects activity on the 10 Mbps Ethernet
link integrity signal.
Yellow Off 100 Mbps Ethernet Indication.
The Tenor unit detects the 100 Mbps Ether-
net link integrity signal, indicating normal
condition.
Blink Yellow Off 100 Mbps Ethernet Activity.
On: Detects activity on the 100 Mbps Ether-
net link integrity signal.