Monitoring, Monitoring -9, Alarms – Quintum Technologies Call Routing Server User Manual
Page 46

P/N 480-0028-00-00
5-9
Chapter 5: Configure via Command Line Interface (CLI)
Monitoring
The Monitor mode enables you to
perform status procedures on the unit. It monitors the unit, which
includes alarm generation and trunk group status.
alarms
Description:
A monitoring command used to display alarm statistics.
Cmd Type:
Command.
Prompt Level:
Main Routing Server prompt.
Syntax:
alarms {-h, -a, -l, -o}
alarms -h. Displays help.
alarms -a. Displays active alarms.
alarms -l. Displays alarm history.
alarms -o. Generates log file on server.
Availability:
All Releases of Tenor Routing Server
Examples:
Routing Server> alarm -l -
an alarm history for the system will be displayed.
Sample Display:
alarms -a
Id Time Type Severity IP Address TGId Description
=====================================================================================
1 2003-03-01 03:38:27 2003-03-01 03:38:57 1 1 2 192.168.2.16 9 None Excessive Packet Loss
2 2003-03-01 04:10:44 2003-03-01 04:11:44 1 1 2 192.168.2.16 9 None Excessive Packet Loss
alarms -l
Id Time Clear Time Clear Type Type Severity IP Address TGId Description
=====================================================================================
1 2003-03-01 03:38:27 2003-03-01 03:38:57 1 1 2 192.168.2.16 9 None Excessive Packet Loss
2 2003-03-01 04:10:44 2003-03-01 04:11:44 1 1 2 192.168.2.16 9 None Excessive Packet Loss
3 2003-03-01 04:13:14 2003-03-01 04:15:14 1 1 2 192.168.2.16 9 None Excessive Packet Loss
4 2003-03-05 16:57:54 2003-03-05 17:12:24 1 1 2 192.168.2.16 9 None Excessive Packet Loss
5 2003-03-05 17:22:25 2003-03-05 17:23:25 1 1 2 192.168.2.16 9 None Excessive Packet Loss