LSC Lighting maXim MP - Manual (Page 11)

maXim MP L(P) XL(P) XXL(P)
Operator Manual V3
LSC Lighting Systems (Aust) Pty. Ltd
Page
5
2 PRODUCT DESCRIPTION
2.1 INTRODUCTION
The maXim MP, L(P), XL(P) and XXL(P) models are the larger desks in the extensive maXim family of
fader based lighting controllers. The letter P in the model name indicates that the PaTPaD moving light
controller has been fitted.
This manual describes the operation of the maXim including the PaTPaD. If your maXim is not fitted with
a PatPad, please disregard any references to it. As you will see, the PaTPaD provides a multitude of
features that are essential when operating moving fixtures. If you want to add these features, a PaTPaD
can be retrofitted to your maXim by your LSC dealer.
All models are very similar in operation and vary only in their size, layout, number of faders and
memories. At any point in this manual where the model affects the specification, the text will describe the
maXim
MP followed by the maXim L, XL and XXL in brackets.
For example; “The Yellow bank has faders for channels/fixtures 1 to 24 (36, 48, 60)”.
2.2 FEATURES
The maXim incorporates the following features;
• Manual faders for all channels/fixtures with associated Flash buttons.
• “Preset”, “Wide” and “Playback” modes of operation.
• 9 pages of non volatile memory.
• Separate In (up) and Out (down) fade times (0 to 999 seconds).
• Scene Fade Times can be derived from the Time Faders or from Memory.
• Electronic labelling of all fixtures, scenes, chases, filters, presets, palettes, stacks and stack steps.
• Fully proportional Softpatch.
• Flash level control, with associated Add or Solo mode button.
• Page freeze retains active output when pages or modes are changed.
• User prompts appear on the display and active buttons flash to make operations simple.
• Different languages are available.
• Multi display SVGA colour video output.
• Fully Isolated DMX512/1990 output signal.
• Power supply is auto selecting, 90−260 volts, 47/63Hz.
maXim L(P)
Extensive Editing
and Control
functions. Masters
for overall
control.
Simple
recording
and
copying
functions.
Theatrical style Stack
with up to 500 steps
On Board
keyboard for
naming of
memories etc.
Red bank has 3 Modes.
Preset (duplicate channels).
Wide (additional channels/ fixtures).
Playback (for Scenes or Chases)
with 9 pages of memory.
Separate In and Out
Time Masters .
Blue
Playbacks for
Scenes or
Chases with 9
pages of
memory.
PaTPaD.
Touch pad for
control of moving
fixtures.
Yellow bank channel / fixture
faders with associated Flash
buttons.
Add or Solo
Flash modes
with level
control.