Interlogix TruVision DVR 12 User Manual - Manual (Page 86)

84 TruVision DVR 12 User Manual
To delete a preset tour:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. From the preset list, select a tour number and click to delete the selected
preset tour.
– Or –
In the preset tour toolbar, click to delete all the preset tours for the
selected tour.
3. Click Back to return to live view.
To call up a preset tour:
• PTZ control panel:
1. In live view left-click the mouse and select the PTZ control icon in the quick
access toolbar. The PTZ control panel appears. Select the desired camera
from the toolbar.
– Or –
On the front panel, select the desired camera and press Enter to call up the
quick access toolbar. The PTZ control panel appears.
2. Scroll the toolbar to Tour and double-click the desired preset tour from the
list. The camera immediately carries out the preset tour movement.
• Menu toolbar:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. Select the desired preset tour from the list and click to start the tour. Click
to stop the preset tour.
3. Click Back to return to live view.
Setting and calling up a shadow tour
The shadow tour command remembers the manually-controlled PTZ dome
camera movement track. One shadow tour can be set up.
Note: The PTZ dome camera used must be able to support a shadow tour
command. See Appendix F on page 143 for the complete list of PTZ commands
available by camera protocol.
To set up a shadow tour:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. Select the shadow tour from the list.
3. To record a new shadow tour, click and use the directional buttons on the
PTZ control panel to move the camera along the desired path.
4. Click to save the shadow tour.