Interlogix TruVision DVR 12 User Manual - Manual (Page 65)

TruVision DVR 12 User Manual 63
Table 6: Description of the menu toolbar icons
Icon Name Description
Display Settings Configures display settings including dwell time, schedule,
language, system date and time, audio output, device
name, and display formats. See “Configuring live view” on
page 71 and “Holiday schedules” on page 27.
Camera Management Configures camera settings including motion detection,
video image adjustments, camera title, privacy mask,
tamper-proof, video loss, restricted access camera, and
copy settings to other cameras. See “Camera settings” on
page 102.
Video Schedule Configures recording settings including recording
schedules, record quality, auto delete mode, manual record,
overwrite, and recording mode. See Chapter 4 “Recording”
on page 22.
Network Settings Configures standard network settings including IP address,
email notifications, DDNS setup, PPPoE, SNMP, FTP,
UpnP, and advanced network settings. See Chapter 6
“Network settings” on page 39.
Alarm Settings Configures alarm settings including alarm input, relay
output, video loss, remote alert, pre-alarm, post-alarm
seconds, and buzzer time. See Chapter 5 “Alarm settings”
on page 31.
PTZ Settings Configures PTZ settings. See Chapter 10 “Controlling a
PTZ camera” on page 79.
User Management Configures users, passwords, and access privileges. See
Chapter 15 “User management” on page 111.
System Settings Configures system settings including system date and time,
audio output, device name, RS-485 settings, RS-232
settings, firmware upgrade, hard drive settings, boot log,
default settings, import/export configuration file, and
shutdown. See Chapter 7 “HDD management” on page 49
and Chapter 13 “Recorder management” on page 102.
Help Information Provides reference information to the various toolbars,
menus, and keys within the interface.
Power Manager Provides access to logout, reboot, and shutdown options.
See “Turning on and off the recorder” on page 17.
To access the main menu:
1. In live view press the Menu button on the remote control or front panel.
- Or -
Right-click the mouse and select Menu from the pop-up menu.