Interlogix TruVision DVR 12 User Manual - Manual (Page 115)

TruVision DVR 12 User Manual 113
Remote configuration settings
• Remote Log Search: Remotely view logs that are saved on the recorder.
• Remote Parameter Settings: Remotely configure parameters and import
configuration.
• Remote Serial Port Control: For future use.
• Remote Video Output Control: For future use.
• Two-Way Audio: Use two-way audio between the remote client and the
recorder.
• Remote Alarm Control: Remotely alert or control the relay output of the
recorder. Alarm and notification settings must be configured properly to
upload to host.
• Remote Advanced Operation: Remotely manage HDDs (initializing and
setting properties for HDDs) as well as remotely update system firmware and
clear the I/O alarm output.
• Remote Shutdown/Reboot: Remotely shutdown or reboot the recorder.
• V-stream: Remotely configure v-stream.
Camera configuration settings
By default, all analog cameras are enabled for operators for each of these
settings and none for guests.
• Camera Permission: Select the cameras that can be accessed by the user.
• Local Live View: Select and view live video locally on the recorder.
• Local Playback: Locally play recorded files that are on the recorder.
• Local Manual Operation: Locally start/stop manual recording on any of the
channels, snapshots and video clips.
• Local PTZ Control: Locally control PTZ dome cameras.
• Local Video Export: Locally back up recorded files from any of the channels.
• Remote Live View: Select and view live video over the network.
• Remote Playback: Remotely play and download recorded files that are on
the recorder.
• Remote Manual Operation: Remotely start/stop manual recording on any of
the channels, snapshots and video clips.
• Remote PTZ Control: Remotely control PTZ dome cameras.
• Remote Video Export: Remotely back up recorded files from any of the
channels.