Interlogix TruVision DVR 12 User Manual User Manual

Page 74

TruVision DVR 12 User Manual

Figure 18: Layout window (General tab)

Table 11: Description of the Layout window

Submenu name

Description

Video Output Interface

Select which monitor will be the main monitor: HDMI/VGA, or main
CVBS.

Default is HDMI/VGA, if connected.

Window Segmentation

Select which multiview layout will be default in live view mode. The
factory default multiview format displays all channels (2x2 layout for
the 4-channel TVR 12, 3x3 layout for the 8-channel TVR 12, and 4x4
for the 16-channel TVR 12).

Dwell Time

Set the length of time for which a camera image is displayed on the
selected monitor before moving to the next camera during
sequencing. Default is off (“No switch”).

Enable Output

You can hear audio from cameras in both live and playback mode.
However, in order to be able to hear audio in playback you must
enable the audio output setting.

Check the box to enable/disable audio output.

Event Output

Select which monitor will be the event monitor: HDMI/VGA, or main
CVBS. Default is Main CVBS.

Event Full Screen
Monitoring Dwell Time(s)

Set the length of time for which an event appears on the event (B)
monitor before moving to the next camera during sequencing. Default
is 10 seconds.

Alarm Full Screen
Monitoring Dwell Time(s)

Set the length of time for which an alarm event appears on the event
(B) monitor before moving to the next camera during sequencing.
Default is 10 seconds.

Audio Output Linked To

Select from which monitor (Main CVBS or VGA) audio can be heard.

To set up the display options:

1. Click the

Display Mode Settings

icon in the menu toolbar.

2. Select

Layout

General

3. Specify the desired settings for each of the menu options.

4. Click

Apply

to save the settings.

5. Click

Back

to return to live view.