Interlogix TruVision DVR 12 User Manual - Manual (Page 82)

80 TruVision DVR 12 User Manual
5. Click Apply to save the settings.
Calling up presets, preset tours and shadow
tours
When in live view you can quickly call up the list of existing presets, preset tours
and shadow tours by using the front panel, remote control, mouse and keypad.
Front panel Press Enter . PTZ control panel appears.
Mouse Right-click the mouse on the desired camera image. The quick access
toolbar appears. Click the PTZ control icon to enter PTZ mode. The PTZ
control panel appears.
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter button on the keypad. For further information, see KTD-
405 keypad on page 133.
If the display was in multiview format, it changes to full-screen format for the
selected camera. See Figure 23 below for a description of the PTZ control panel.
Figure 23: PTZ control panel
Table 15: Description of the PTZ control panel
Item Name Description
1. Directional pad/auto-
scan buttons Controls the movements and directions of the PTZ. Center button
is used to start auto-pan by the PTZ dome camera.
2. Zoom, focus and iris Adjusts zoom, focus and iris.
3. PTZ movement Adjusts the speed of PTZ movement.
4. Toolbar Turns on/off camera light.
Turns on/off camera wiper.
Zoom area.