Interlogix TruVision DVR 12 User Manual - Manual (Page 22)

20 TruVision DVR 12 User Manual
9. Recording configuration:
Configure your recording settings as required. The settings apply to all
cameras connected to the recorder. The window for “Advanced Record
Settings” is shown below:
Check the Constant Recording checkbox for the recorder to record
continuously all day. If left unchecked, the recorder will not record.
Check the TL-Hi check box and select its image resolution and frame rate.
Check the TL-Lo check box and select its image resolution and frame rate.
To record motion detection events, check Event (Motion) and select the
image resolution and frame rate.
To record alarm events, check Alarm and select the image resolution and
frame rate.
Click Camera name to enter the camera name. A soft keyboard will appear to
enter the characters.
10. When all the required changes have been entered, a page appears showing
all the settings.
Click Finish to exit the Wizard. The recorder is now ready to use.