Interlogix TruVision DVR 12 User Manual - Manual (Page 123)

TruVision DVR 12 User Manual 121
Menu Function Description
information.
Video Settings Define general recording settings. See “Defining a
recording schedule” on page 25 for more information.
Record Schedule Define the recording schedules. See “Defining a
recording schedule” on page 25 for more information.
Motion Detection Define motion detection parameters. See “Setting up
motion detection” on page 32 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Setting
up privacy masking” on page 108 for more information.
Tamper Mask Define the video tampering detection settings. See
“Detecting video tampering” on page 38 for more
information.
Video Loss Define the video loss detection settings. See “Detecting
video loss” on page 37 for more information.
Text Overlay Add extra lines of text on screen. See “Text overlay” on
page 125.
Restricted Access
Camera Define the cameras whose images cannot be displayed
by those not logged in. See “Hiding a camera image from
view” on page 109 for more information.
Capture Settings Define the resolution and image quality of snapshots.
Manual Record Define which cameras can manually record. See “Manual
recording” on page 29 for more information.
Network Settings General Define the general network settings. See “Configuring
general network settings” on page 39for more
information.
PPPoE Define the PPPoE settings. See “Configuring PPPoE” on
page 40 for more information.
DDNS Define the DDNS settings. See “Configuring DDNS” on
page 41 for more information.
Email Define the settings to send an email. See “Configuring
email” on page 43 for more information.
UPnP Enable this function so that the NVR can automatically
configure its own port forwarding. See “Configuring
UPnP” on page 44 for more information.
SNMP Define the SNMP settings. See “Configuring SNMP” on
page 45 for more information.
FTP Define the FTP settings. See “Configuring an FTP server
to store snapshots” on page 45 for more information.
More Settings Define a remote alarm host, multicast IP as well as the
server, HTTP, and RTSP ports. See page 46 for more
information.
Alarm Settings Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Setting up external alarms” on
page 34 for more information.