beautypg.com

AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 8

background image

Configuring Analog Extensions with AudioCodes Gateways

Page 8 of 25

3.

Select VoIP > Media > RTP/RTCP Settings.

Figure 9: Configure the Media RFC 2833 Payload settings

4.

Select VoIP > Media > General Media Settings.

Figure 10: Configure the general media settings

Set both RFC 2833 TX Payload Type and

RFC 2833 RX Payload Type to 101.

Make sure that NAT Traversal is set to

Disable, so that it will not conflict with

MaxCS’s NAT Traversal.