AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 14

Configuring Analog Extensions with AudioCodes Gateways

Page 14 of 25

13.

Select VoIP > GW and IP to IP > DTMF and Supplementary > DTMF & Dialing.

Figure 19: Configure DTMF and dialing settings

14.

Select VoIP > GW and IP to IP > DTMF and Supplementary > Supplementary Services.

Figure 20: Disable hold, transfer, and call waiting

•

If your MaxCS extension length is 3 digits, set Digit Mapping Rules to

911|##|[1-7]XX|#XX|9[2-9]XXXXXX|91[2-9]XXXXXXXXX|XX.T

•

If your MaxCS extension length is 4 digits, set Digit Mapping Rules to

911|##|[1-7]XXX|#XX|9[2-9]XXXXXX|91[2-9]XXXXXXXXX|XX.T

•

Set Declare RFC 2833 in SDP to Yes.

•

Set 1st Tx DTMF Option to RFC 2833.

•

Set RFC 2833 Payload Type to 101.

•

Set Hook-Flash Option to INFO (NetCentrex).

•

Set Enable Hold to Disable.

•

Set Enable Transfer to Disable.

•

Set Enable Call Waiting to Disable.