AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 13

Configuring Analog Extensions with AudioCodes Gateways

Page 13 of 25

11.

Select VoIP > GW and IP to IP > Hunt Group > Hunt Group Settings. Configure Entry 1 as follows.

Figure 17: Configure hunt group settings

12.

Select VoIP > GW and IP to IP > Routing > IP to Hunt Group Routing. Configure Entry 1 as follows:

Figure 18: Configure hunt group routing rules

•

Enter 1 for the Hunt Group ID.

•

Set Channel Select Mode to By Dest Phone Number.

•

Set Registration Mode to Per Endpoint.

•

Make sure Serving IP Group ID is blank.

•

Set the first five fields, Dest. Host Prefix, Source Host Prefix,

Dest. Phone Prefix, Source Phone Prefix, and Source IP Ad-
dress, to

•

Set Hunt Group ID to 1. (This assumes that the FXS port's hunt

group ID is 1.)