beautypg.com

AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 16

background image

Configuring Analog Extensions with AudioCodes Gateways

Page 16 of 25

17.

Select VoIP > GW and IP to IP > Analog Gateway > Caller ID Permissions. Enable for Caller ID for all ports.

Figure 23: Enable Caller ID

18.

Select VoIP > GW and IP to IP > Analog Gateway > Authentication. Configure the entry Port 1 FXS as fol-

lows:

Figure 24: Configure authentication settings

Set User Name to 167.

For the password, enter 5656.

(This is the extension and password you set up on page 4.)
Note: If you save and then restore the .ini file under Mainte-

nance > Software Update > Configuration File, due to

AudioCodes’ security concern, the password will be

erased. You will need to re-enter the password here, after

you restore the .ini file.)